Oct 16, 2012

This parts list should help anyone that is looking to compile the right parts for building a TH400 for mid 9 second et's.In most applications this is what will work.It is not meant to be the absolute authority on the trans,just to answer this commonly asked question so you have a direction to go in with the project.

  • 5 or 6 Borg Warner Hi Energy forward clutches.
  • 5 or 6 Borg Warner Hi Energy direct clutches.
  • 3 Borg Warner stock waved paper intermediate clutches.
  • Stock steels,preferably the original Intermediate wave plate for 2nd gear.
  • Aluminum clutch pistons for the forward,direct and intermediate clutch packs.
  • A 34 element sprag and direct clutch drum with spiral retaining ring.
  • A billet forward clutch hub ,fitted with roller bearing if possible.
  • A torrington bearing installed between the output shaft flange and case.
  • Resin washer to be installed between the planetary carriers.
  • Graphite seal rings for the pump and center support.
  • A complete set of end play washers.
  • A complete set of bushings.
  • A new # 22 thrust bearing.
  • A hi flow brass filter.
  • A quality gasket and seal kit.